Welcome page
Products
Technology
SMS solutions
Databases
Modbus
M-Bus
PBX systems
OZEKI Phone System XE
Asterisk
AsteriskNow
Elastix
FreePBX
Kamailio
OpenSIPS
PBXnSIP
PBXpress
SipX ECS
3CX
Robotics
Upload Arduino code
Company


Ozeki 10
Kamailio Kamailio | PBXnSIP PBXnSIP

OpenSIPS, how to create a SIP account

This guide shows you how to create 2 users with 1-1 extension each on OpenSIPS PBX. One of the extensions can be connected to Ozeki 10. Before you start to configure this solution, it is assumed that you have already installed your OpenSIPS PBX on your Linux server.

Configure OpenSIPS

I have already installed OpenSIPS PBX in a Linux distribution which IP address is 192.168.91.227. Open a browser and navigate to OpenSIPS web interface. In this example it will be:

http://192.168.91.227/opensips-cp/web/index.php

Once you are at the login page, login as administrator (Figure 1).


Figure 1 - Login as administrator

After you logged in, open the 'Users' dropdown menu and click on 'User Management' (Figure 2).


Figure 2 - Click on User Management

This will lead you to the Users page. Click on 'Add New' to add a new user to your OpenSIPS PBX (Figure 3).


Figure 3 - Add a new user

Provide the username, the e-mail address and a password in the respective fields, and click on 'Register' (Figure 4).


Figure 4 - Register a new user

I have created two users in OpenSIPS PBX: user 100 and user 101. Ozeki 10 will register as user 101, and a VoIP phone will be registered as user 100. You can see the created users in Figure 5.


Figure 5 - Created users


Now the configuration is complete so you can start your phone lines and connect them with Ozeki 10.


Copyright © 2000- - Ozeki Ltd | info@ozeki.hu | Tel: +36 1 371 0150
Home > Technology > PBX systems > OpenSIPS
Legal | Privacy policy | Terms of use
Page: 1107 | Login | 54.146.195.24