- PBX systems
- OZEKI Phone System XE
- SipX ECS
- Upload Arduino code
Kamailio, how to create a SIP account
This guide shows you how to install Kamailio on a Linux distribution. By default, you don't need to define any extension in Kamailio, and you can register to it with any username or password. You need to install Kamailio PBX on your Linux server. In this guide we will show you how to do this. You can use the default configuration of Kamailio PBX.
Configure Kamailio PBX
First, login to your Linux distribution, start a terminal, and type 'su' to login as administrator (Figure 1).
Figure 1 - Login as administrator
Next, download the Kamailio installation package. Since I use a Fedora distribution in this example, I will need the .rpm package. Download the package with wget in the following way (Figure 2):
wget http://download.opensuse.org/repositories/home:/kamailio:/ telephony/Fedora_14/i686/kamailio-3.1.3-4.1.i686.rpm
Figure 2 - Download Kamailio package
When the package is downloaded, you need to install it. Please note that you will have to skip the gpg check for this package (Figure 3).
yum install kamailio-3.1.3-4.1.i686.rpm --nogpgcheck
Figure 3 - Install Kamailio package
Once Kamailio is installed, you can start using it with its default settings. By default, you don't need to define any extension in Kamailio, and you can register to it with any username or password. All you need to do is to start the Kamailio service in your distribution (Figure 4).
service kamailio start
Figure 4 - Start Kamailio service
Now the configuration is complete so you can start your phone lines and connect them with Ozeki.