Connect a VoIP Service Provider
Step 1 - Create new connection
Go to the 'Quick start' page and select 'Step 3 - Connections'.
Figure 1 - Create new connection
Step 2 - Create 'Telephone' based connection
After the new page appeared click on 'Create new connection'. Then select the 'Telephone' connection.
Figure 2 - Create new 'Telephone' connection
On the right in 'Connection details' window, select the middle one 'VoIP Service'.
Figure 3 - Choose 'VoIP service' connection
Step 3 - General tab information
At the 'General' tab you can provide connection details. The 'Connection name' is a unique name, it helps you to keep your connections organized, it is easier to differentiate them with different names. You can enable autoconnect and autoreconnect by checking 'Connect on statup'
At SIP Settings make sure there is a blue box next to 'Register'.
You can specify how many automated calls you would like to make at 'Simultaneous calls' and define the maximum ring time at 'Max. ring time', which may be limited by your VoIP service provider.
Figure 4 - General tab
Step 4 - Network, Transfer, Times and Log
If you go to 'Net' tab you can setup your network adapter which will be connected to the 'VoIP network'. Also 'Firewall settings' and 'Delivery speed' can be provided in this tab.
Figure 5 - Network settings
At 'Transfer' tab you can transfer the calls to a live person if DTMF response is received. Check the box next to 'Enable call transfer if DTMF response is received.' and add the phone numbers below to the suitable keypad.
Figure 6 - Transfer tab
At 'Times' tab you can specify the time and day interval when communication is allowed.
Figure 7 - Times tab
In the 'Log' tab you can log your calls. You can enable and disable logging by checking the box next to 'Enable logging'.
Figure 8 - Logging settings
Step 5 - How to dial
If a green pipe appeared it means your connection has been established.
Figure 9 - Open the connection details page
Step 6 - Make a test call
Click on 'Call'.
Figure 10 - How to make a test call
Figure 11 - Compose your message
Click on 'Log' or 'Events' and you can check if your call was successful.
Figure 12 - Event log