Arduino ID Manager Protocol

This protocol helps ID management. Every device's ID is stored. Every ID has a position in the ID Manager. The ID Manager's ID is in the first position.

How to test ID Manager on Arduino Mega?
Arduino codes are included.

I. "Welcome" event from microcontroller

Example

c=welcome&id=qwertz&type=OzIDManager&pos=1&t=3

Parameters

Parameter Type Range Functionality
c String "welcome" Identifies the welcome message.
id String 6 characters (numbers, uppercase and lowercase characters) The ID of the device which is chose by the microcontroller.
type String "OzIDManager" Determines the type of the device.
pos Byte 0-255 Determines the position of the device on the list of the ID manager of the microcontroller. Please make sure there are no other devices in the same position.
t Byte 0-255 Counts the number of events and responses sent combined. Counts from 0 to 255 then from 0 again.



II. Commands to microcontroller

"Get ID" command

With this command you can get the ID of a device on a given position.

Example

c=getid&pos=1&t=0&id=ah35q1

Parameters

Parameter Type Range Functionality
c String "getid" Identifies the command.
pos Byte 0-255 This is the position of the searched device inside the ID manager.
t Byte 0-255 Counts the number of commands sent. Counts from 0 to 255 then from 0 again.
id String 6 characters (numbers, uppercase and lowercase characters) The ID of the IDManager.

Response

c=getid_resp&pos=1&devid=qwertz&id=ah35q1&t=3

Parameters

Parameter Type Range Functionality
c String "getid_resp" Identifies the response.
pos Byte 0-255 This is the position of the searched device inside the ID manager.
devid String 6 characters This is the ID of the searched device inside the ID manager.
id String 6 characters (numbers, uppercase and lowercase characters) The ID of the IDManager.
t Byte 0-255 Counts the number of events and responses sent combined. Counts from 0 to 255 then from 0 again.



"Set ID" command

With this command you can add or rewrite the ID of a device on a given position.

Example

c=setid&pos=1&devid=jz6o32&t=1&id=ah35q1

Parameters

Parameter Type Range Functionality
c String "setid" Identifies the command.
pos Byte 0-255 This is the position of the searched device inside the ID manager.
devid String 6 characters The device will get this new ID.
t Byte 0-255 Counts the number of commands sent. Counts from 0 to 255 then from 0 again.
id String 6 characters (numbers, uppercase and lowercase characters) The ID of the IDManager.

Response

c=setid_resp&pos=1&devid=jz6o32&id=ah35q1&t=4

Parameters

Parameter Type Range Functionality
c String "setid_resp" Identifies the response.
pos Byte 0-255 This is the position of the searched device inside the ID manager.
devid String 6 characters This is the ID of the searched device inside the ID manager.
id String 6 characters (numbers, uppercase and lowercase characters) The ID of the IDManager.
t Byte 0-255 Counts the number of events and responses sent combined. Counts from 0 to 255 then from 0 again.



"Clear ID" command

With this command you can delete the ID from a given position. A new ID will be generated if arduino restarted.

Example

c=clearid&pos=2&t=2&id=sf6z34

Parameters

Parameter Type Range Functionality
c String "clearid" Identifies the command.
pos Byte 0-255 This is the position of the searched device inside the ID manager.
t Byte 0-255 Counts the number of commands sent. Counts from 0 to 255 then from 0 again.
id String 6 characters (numbers, uppercase and lowercase characters) The ID of the IDManager.

Response

c=clearid_resp&pos=2&id=sf6z34&t=5

Parameters

Parameter Type Range Functionality
c String "clearid_resp" Identifies the response.
pos Byte 0-255 This is the position of the searched device inside the ID manager.
id String 6 characters (numbers, uppercase and lowercase characters) The ID of the IDManager.
t Byte 0-255 Counts the number of events and responses sent combined. Counts from 0 to 255 then from 0 again.



III. Event from microcontroller

None

More information