- PBX systems
- Building robot hardware
- Building electronics
- Ozeki Matrix
- PCB designing
- Making the board
- Drilling and cutting the board
- Soldering and testing
- Burnishing and soldering
- Testing your PCB panel
- Building robot software
- Robot training
- Upload Arduino code
Burnishing your PCB and soldering components on it
Now comes our electronic engineer's favorite part. The part when they can finally solder the components onto the board and say out laud that the board is ready. You can learn more about burnishing and soldering from the screenshots we have provided for you. After you completed this tutorial only testing remains which you can learn about in the next tutorial.
Figure 1 - Burnish smoothly the surface of the PCB board with a sandpaper
Figure 2 - Put wires through the vias and solder them. We advise copper wires.
Figure 3 - Solder remaining components onto the board
Figure 4 - The finished PCB board. To test it out, jump to the next tutorial.