Arduino NFC Reader Protocol
How to build a test circuit with a NFC controller and an Arduino Mega?
Arduino codes are included.
I. "Welcome" event from microcontroller
Example
//for RC522 modules: c=welcome&id=KT75pc&type=OzNfcReader&pos=1&name=MyNfcReader&t=1 //for PN532 modules c=welcome&id=fg7mtg&type=OzPN532Controller&pos=1&name=MyPN532Controller&t=1
Parameters
Parameter | Type | Range | Functionality |
c | String | 'welcome' | Identifies the welcome message. |
id | String | 6 characters (numbers, uppercase and lowercase characters) | The ID of the device which is chosen by the microcontroller. |
type | String | 'OzNfcReader' or 'OzPN532Controller' | Determines the type of the device. |
pos | Byte | 0-255 | Determines the position of the device on the list of the ID manager of the microcontroller. Please make sure there are no other devices in the same position. |
name (optional) | String | e.g. 'MyNfcReader' | You can give default names for devices. |
t | Byte | 0-255 | Counts the number of events and responses sent combined. Counts from 0 to 255 then from 0 again. |
II. Commands to microcontroller
None
III. Event from microcontroller
'NFC Reader' event
This event is generated every time an NFC card is swiped over the NFC reader. It forwards the hexadecimal data contained on the NFC card. Every byte represents a pair of hexadecimal numbers.
Example
c=nfcreader&idhex=f9c8fbfe&id=i479ZY&t=3
Parameters
Parameter | Type | Range | Functionality |
c | String | 'nfcreader' | Identifies the event. |
idhex | String | Any bytelength (1 byte = 2 hex number) |
The read ID in hexadecimal format. They bytes are read from the NFC tag. |
id | String | 6 characters (numbers, uppercase and lowercase characters) | Identifies the device. The ID is never changed during communication. |
t | Byte | 0-255 | Counts the number of events and responses sent combined. Counts from 0 to 255 then from 0 again. |
More information
- Protocole série de l'émetteur-récepteur RF 433 MHz
- Protocole série du joystick analogique
- Protocole série du capteur analogique
- Protocole série du bouton
- Protocole série du buzzer
- Protocole série du moteur DC
- Protocole série du capteur DHT
- Protocole série de l'EEPROM
- Protocole série du clavier
- Protocole série du capteur gyroscopique
- Protocole série du gestionnaire d'ID
- Protocole série de l'émetteur-récepteur IR
- Protocole série de l'écran LCD
- Protocole série du lecteur NFC
- Protocole série de la barrière optique
- Registre
- Protocole série de l'émetteur-récepteur RF24
- Protocole série de la LED RVB
- Protocole série du capteur RVB
- Protocole série de l'encodeur rotatif
- Protocole série du moteur servo
- Protocole série du compteur de pas
- Protocole série du moteur pas à pas
- Protocole série de l'interrupteur
- Protocole série du capteur de température
- Protocole série de la minuterie
- Protocole série du capteur ultrasonique
- Messages de bienvenue de l'imprimante 3D Ozeki