SMS Gateway software
Ozeki brings you outstanding
SMS Gateway technology. Use our SMS Server products on Windows,Linux, or Android

Developers can use our C# SMS API to send SMS from C#.Net. The C# SMS API comes with full source code

The ozeki PHP SMS gateway software can be used to send SMS from PHP and to receive SMS usig PHP on your website

SMPP SMS Gateway
SMS service providers use our SMPP gateway solution, that offers a high performance SMPP server and SMPP client gateway with amazing routing capabilities

Drilling and cutting out your PCB board

In this tutorial screenshots will demonstrate the most important steps of the CNC milling process. Before milling you need to start by installing the milling head required for the first gcode. Use the head diameter specified in the gcode. Then set the origin point of your milling head and upload the appropriate gcode to the software controlling your machine. Do not forget to switch the head when a toolchange is necessary for example when it is required to drill NPTH holes instead of pin holes. You can do the edge cut with the same head.

start the video

Screenshots below:

does the milling head fit between the clamps
Figure 1 - Does the milling head fit between the clamps?

alignment of the pcb board
Figure 2 - Is the alignment of the PCB board parallel to the X and Y axis?

drill out the holes
Figure 3 - Drilling out the holes. The milling head diameter should be as specified in the gcode.

cutting the edges
Figure 4 - Cutting out the edges. You can use the same milling head as you used for drilling NPTH holes.

break out the pcb board
Figure 5 - Finally, break out the PCB board from the plastic frame.

More information