Wavecom SMS modem
The Wavecom Fastrack device is fast and easy to install GSM modem. This device with GSM / GPRS connection provides the opportunity to develop M2M solutions. It is perfect for sending and receiving SMS messages. Stable and reliable operation in extreme environmental conditions. The small-sized GSM modem can be mounted in server houses or on a wall. The Fastrack modem can be controlled by AT commands. The GSM modem module can be connected via a serial port to a PC or other data processing or transmission device via a data cable.
Wavecom SMS modem setup
Ozeki NG 10 configuration
Wavecom SMS modem documents
|Data Sheet||Pages||Size (kB)|
|Wavecom Fastrack M1306B User Guide (PDF)||67||1615|
|Wavecom Fastrack M1306B Porting Guide (PDF)||63||743|
Set up your Wavecom SMS modem
In the first step, you have to plug the SIM card into your SMS modem as Figure 1 shows it.
Next, as you can see on Figure 2, you need to connect the antenna of the modem to your SMS modem.
To work with this modem, you have to connect it to a power supply. So, as Figure 3 shows it, with the AC/DC adaptor, plug the modem into a light socket.
When the modem gets the power from the light socket, the red led on the modem should start blinking if you connected the SIM card right (Figure 4).
The last thing that you need to do in this setup process is to connect the modem to your computer. For that, first, plug the RS232 cable into your modem as you can see it on Figure 5.
Next, plug the RS232 cable to the converter (Figure 6), so now you can connect the modem to your PC by using a simple USB port.
Lastly, you just need to plug the cable with the converter into your computer (Figure 7).
Configure the modem in Ozeki NG 10
Now your modem is ready to be configured. The first step you have to fulfill is to open Ozeki NG 10 on your desktop (Figure 8).
Next, log in with your Ozeki NG 10 account by typing your username and password as you can see on Figure 9 This account has to be created during the installation process.
Here, in the SMS Gateway application, the first thing that you need to do is to create a new connection. For that, just click on Add new connection as you can see on Figure 10.
The next window lists you all the connections that you can create in the SMS Gateway application. Now, as Figure 11 demonstrates, you have to select the SMS modem connection by clicking on Install.
In the installation menu, you need to select the port, where you connected the modem. For that, just click on the Autodetect button as you can see on Figure 12.
This Autodetect option will detect your modem, and if it is connected right the following window should show up like in Figure 13.
Send an SMS message using the modem connection
At this point, you have an SMS modem connection in the SMS Gateway application. To handle SMS messages with this connection, first, you need to enable the connection (Figure 14) by turning on the switch button in the connection details window.
To send the SMS message, you need to type the phone number of the recipient (Figure 15) in the Recipient field.
Next, just type the text of the SMS message to the SMS field like in Figure 16.
If you are ready to send the SMS message, just click on the Send button (Figure 17).
If you did everything right, the message will be received by the recipient as you can see on Figure 18.
Quick Data sheet
|Model||M - 1306B-1|
|Design||Industrial Design,Aluminium Casing|
|Based On||Based on WAVECOM Module A-2406B|
|Band||Dual Band 900/1800 Mhz|
|Internet||Wireless Access to internet|
|AT Commands||Support AT command to make remote Control (GSM07.07 & 07.05)|
|Interface||DB -15 PIN RS232 Interface|
|SIM Slot||3 Volt SIM Card slot|
|GPRS Class||GPRS Class 10|
|Transmatting Speed||Maximum Transmatting Speed 115.2 Kbps|
|DTMF||Double Tone multi frequency function(DTMF)|
|Work||Send SMS, Data, FAX, E-mail and Voice|
|Antenna||Antenna with high sensitivity|
|Output Power||Class 4 (2W@900) Mhz / Class 1(1W@1800) Mhz|
|Input Voltage||6V to 36 V DC|
|Input Current||1A to 2 A|
|Standard Current||Standard Current 52 mA|
|Working Current.||100 – 140 mA|
|Working Temp.||(-20C to -+55C)|
|Store.temp.||(-25C to -+70C)|